BIM-4 Balanced Input

The BIM-4 module provides a stereo balanced input receiver which converts the signal to stereo unbalanced for use internally.
The inputs use stereo (TRS) 6.35mm sockets which allow the module to be attached directly to a panel.
The input balanced signals are converted to unblaanced using a THAT1250 device, provideing low noise and high CMRR conversion.
The module is powered using +/-12 to +/-16V rails, usually from a PSU-8 or PSU-12 module.
The 6.35mm sockets are spaced at 22mm and the module itself measures 45mm x 44mm.
The inputs use stereo (TRS) 6.35mm sockets which allow the module to be attached directly to a panel.
The input balanced signals are converted to unblaanced using a THAT1250 device, provideing low noise and high CMRR conversion.
The module is powered using +/-12 to +/-16V rails, usually from a PSU-8 or PSU-12 module.
The 6.35mm sockets are spaced at 22mm and the module itself measures 45mm x 44mm.